Runners, slideline slings, daisy chains and even bulk webbing to make your own slings.
Lightweight Nylon Runner Slings from 1” tubular webbing - MBS 23 kN (5,170 lb). Endless uses in tree work. Length is measured when loop is laid flat.
Colors may vary.
Rhino Loops use dual-layer, 1" tubular nylon webbing to create a loop inside of a loop. This new concept in anchor slings makes them strong, flexible, and easy to inspect. Fluorescent orange inner webbing alerts users of cuts or abrasions during inspection.
The stitch overlap is only 2.5 inches making this loop extremely user friendly - easy to store and handle. Incredibly Strong! Made in the U.S.A.
MBS: End-to-end: 11,000 lbf • Choker: 10,000 lbf • Basket: 15,000 lbf
1” flat nylon slings are sewn from high-strength woven nylon to produce a loop sling that is compact and lightweight while being nearly twice the strength of a tubular nylon runner. These flat slings make excellent anchor straps.
MBS: 10,116 lbs. (45kN)
With a 4,950 lb. break strength, these spectra runners are lightweight and strong, and have dozens of uses for all climbers. Used for light duty applications where dynamic loads are not possible, making custom ascender slings, quick draws, and redirects. Color may vary.
Sewn sling made of high-strength 6mm aramid. Aramid delivers a significantly higher breaking strength than conventional slings. 23 kN rating, CE, made in Germany.
32-Strand HMPE High Tenacity Husky Coated Loops. 16,000 lbs Tensile and Super Light Weight. Endless Loops for Rigging, Stepping, Holding and Bracing. Constructed of a 32-Strand HMPE (High Molecular Weight Polyethylene) with a Husky Urethane Coating. Sewn for a no slip connection point.
16,000 lb. approx. break strength.
The replacement for the traditional sewn daisy chains. It's perfect for repositioning, using as a foot stirrup, or for use in anchor systems.
Sterling's BARC basal anchor chains are high-strength, easily adjustable, and make a sling for quickly attaching hardware. BARC Either stands for “Big A** Rigging Chain” or “Basal Anchor Rigging Chain” - take your pick! Building on the popularity of Sterling's Chain Reactors, the BARC is made from 1" nylon webbing sewn into individual full-strength loops for an adjustable and incredibly strong chain. Designed for use as a basal anchor with your Port-a-Wrap or other device, the BARC can also accommodate your rigging block aloft.
5’ BARC can accommodate trees up to 19” in diameter; 8’ BARC is good for trees up to 32”.
Durable nylon webbing with heavy-duty stitching to form multiple attachment loops. Great for racking your gear or for use as an adjustable tether for SRS climbing. Sold individually.
Screamers are single-use energy absorbing devices which have been used in rock and ice climbing on marginal anchors for decades, ”I started using them in tree work 10 years ago,” says veteran Arborist Dave Stice. ”They are an important item to have in the toolbox for extreme situations.”
Screamers can be used in your rigging system to reduce peak forces by up to 600 lb. They are great for extremely tight drop zones, situations where you don't have room to let the rope run, or for dead and decaying trees. If you are working with new groundsmen, using one of these in the system can avoiding the whiplash effect if the rope is not let run properly.
11” Standard & Shorty Screamers activate at loads greater than 2 kN, reduce peak load 3-4 kN. Runner strength 26 kN (5,395 lb).
22” Zipper Screamers activates at loads greater than 2 kN, reduces peak load 4-8 kN. Runner strength 26 kN (5,395 lb).
Soft Shackle provides a flexible, strong, durable link for attaching rigging tools. Made from high-strength Dyneema.
8mm (5/16”): MBS 12,900 lb.
10mm (3/8”): MBS 15,500 lb.
Tubular nylon webbing from BlueWater Ropes. This webbing out-performs normal mil-spec webbing in strength, flexibility, knotability and durability. There is a minimum exposure of individual fibers as a result of high thread count and fine weave pattern. CE and UIAA Certified. 100% Nylon. Manufactured in the U.S.A. Tensile Strength: 4,046 lbf. (18 kN)
100% Nylon, 2”-wide tubular 100% nylon webbing from BlueWater Ropes. Manufactured in the U.S.A. Tensile Strength: 7,126 lbf. (31.6 kN). UIAA and CE certified.
Type 9800 webbing is a flat, woven nylon webbing that is abrasion resistant and offers a high tensile strength. The increased strength is often preferred in harsh or abrasive environments for anchor building, hauling or making harnesses. Because Type 9800 is woven solid as opposed to a tubular webbing, it can be more difficult to handle. Sold by the foot. Made by Sterling Rope Company in the USA.
MBS 9,800 lb.
Nylon chafe sleeve for the protection of arborist ropes and slings. You may order chafe sleeve by the foot here for your own spliced products, or request it on any spliced product we make that will fit the sleeve. Often used to reinforce spliced eyes or as a movable chafe sleeve on fliplines, winch lines, etc.
