Parallel Static Climbing Rope
.
.
Parallel Static Climbing Rope
**Reels of rope are charged a flat shipping fee in the continental US. Spools of rope up to 9/16" ship for $25 in areas covered by our free shipping offer. Spools of rope 5/8” and larger ship for $50 in these areas. Regular shipping rates apply in other areas.
Leave instructions for which splices go with which ropes in the 'comments' field during checkout, along with the sizes for any custom size eyes, and any instructions for thimbles, rope snaps, or other hardware to add to the splice. (Hardware must also be present in your cart to add it to the splice.)
10.5mm (7/16”) • kernmantle • 4,946 lb (22 kN) Spliced Strength • 3.4% static elongation• 5 lb. per 100’ • sewn eyes only
Low stretch kernmantle rope, flexible and lightweight for rope access.The small diameter ensures very good performance in terms of flexibility and weight. It has low stretch when put under tension, increasing efficiency at the start of a rope ascent. The EverFlex construction guarantees great flexibility and consistent performance over time.
rop1peWesSpur offers free ground shipping for orders that meet the following criteria:
The free shipping offer covers UPS Ground. UPS Ground runs Monday-Friday. Stump Grinder teeth and Chipper Blades eligible for the free shipping offer are shipped via USPS Priority Mail, in Medium Flat Rate Boxes. UPS Ground requires a physical address for delivery (no P.O. boxes).
WesSpur is happy to offer returns or exchanges on any equipment that is still in new condition. Our return policy is fairly simple and is meant to make your life easy. All regular stock items in new/unused condition may be returned for a full refund less shipping within 30 days of purchase. We do not charge restocking fees.
WesSpur can not accept the return of any used equipment or special-order items.
See our full Returns and Warranty Policy on the help page
| Manufacturer | : | Petzl |
| Diameter | : | 7/16” / 10.5mm |
The American National Standards Institute (ANSI) has released the ANSI Z133 safety requirements which apply to arboricultural operations.
Arborist Climbing Ropes are required to have a minimum breaking strength of 5,400 lb (24 kN) when new, and should be no smaller than 1/2” (12.7mm) unless the employee has been trained in the use of smaller line (down to 7/16” / 10.5mm), and the line's working elongation should not exceed 7% at 540 lb load.
Petzl Parallel rope meets ANSI Z133-2017 standards, so long as the employee has been trained in the use of smaller lines.
The full ANSI Z133 safety requirements are available on our tree care standards page.
