A high-performance powered pole saw running on 40v battery. This battery-powered pole saw from Oregon provides constant, no-fade power with planetary gear reduction for high-performance cutting. No hoses, cords, or other hassles.
The mid-mount motor design on this saw provides better balance and reduced weight on the elevate portion of the saw. A compact cutting head further reduces the overhead weight for better control and less fatigue, while incorporating a branch hook for limb removal and an 8” bar.
Oregon's battery-powered pole saw can be easily extended from 7’ 3” to 10’ 4” without tools. Electrical power means the saw starts up with no pull cords, no warm-up, no mixing of gas and oil, and runs with no emissions. Get to work instantly! 40v (4.0 ah) Battery run time is good for an estimated 500 2-3 inch cuts before recharging.
Saw is sold with 40v battery and charger. Additional batteries, charger, and a rapid charger are available by clicking the add-ons tab above.
Rated: Excellent Review by: John
“I just wanted to thank you for your help in getting the right saw for my needs. This is the best pole saw I have ever owned! Well balanced,light and cuts like a gas saw. Battery run times are good and most people will give out before the battery does. Oregon has hit a home run in designing this saw.”
|Bar Length||:||8” (20cm)|
|Chain/Pitch/Gauge||:||Micro-Lite Narrow-Kerf/ 3/8" Low-pro / 0.43”|
|Extension Length||:||7’ 3” to 10’ 4” (2.21 - 3.15m)|
|Approximate Reach||:||14’ to 15’ (4.25 - 4.57m)|
|No Load Chain Speed||:||2817 FPM|
|Oil System||:||Automatic oiler with 3.4 oz (100 ml) tank capacity|
|Charge Time||:||Aprox. 120 Minutes|
|Weight||:||12.5 lb (5.7 kg) with 1.25 Ah Battery, 13.5 lb (6.1 kg), with 2.4 & 4.0 Ah Batteries|
The American National Standards Institute (ANSI) has released the ANSI Z133 safety requirements which apply to arboriculutral operations.
Chainsaw chaps are required when operating a saw on the ground.
The full ANSI Z133 safety requirements are available on our tree care standards page.