HTP (High Tenacity Polyester) is 100% polyester and offers better durability and strength & extremely low stretch versus mixed-fiber ropes. With such low stretch, HTP is a highly efficient rope for hauling, ascending, and high angle rescue situations. HTP ropes perform better in harsh environments. For long ascents (over 300’ or line in the system) HTP has no equal.
Quick Overview: 3/8” diameter, 5,980 lb MBS, 5.3 lb per 100’.
WesSpur offers free ground shipping for orders that meet the following criteria:
The free shipping offer covers UPS Ground. UPS Ground runs Monday-Friday. Stump Grinder teeth and Chipper Blades eligible for the free shipping offer are shipped via USPS Priority Mail, in Medium Flat Rate Boxes. UPS Ground requires a physical address for delivery (no P.O. boxes).
WesSpur is happy to offer returns or exchanges on any equipment that is still in new condition. Our return policy is fairly simple and is meant to make your life easy. All regular stock items in new/unused condition may be returned for a full refund less shipping within 30 days of purchase. We do not charge restocking fees.
WesSpur can not accept the return of any used equipment or special-order items.
See our full Returns and Warranty Help Page
Rated: Excellent Review by: Scott A.
“ I have only used this rope as a rappel line. It has held up well packing it through the brush, coiling and uncoiling, heat or cold, wet or dry. It has a unique hand that does't pick up debris when coiling it up in the brush. Sixty feet of it will go through a u-rack under load and come out with very little hockle. Have been very satisfied with it and would recommend. ”
|Country of Manufacture||:||U.S.A.|
|Diameter (inches / mm)||:||3/8” / 10mm|
|Minimum Strength||:||5,979 lb|
|Weight per 100’ / 100m||:||5.3 lb / 7.7 kg|
|Elastic Elongation||:||1.7% at 300 LB|
The American National Standards Institute (ANSI) has released the ANSI Z133 safety requirements which apply to arboriculutral operations.
Arborist climbing lines are required to have a minimum breaking strength of 5,400 lb (24 kN) when new, and should be no smaller than 1/2” (12.7mm) unless the employee has been trained in the use of smaller line (down to 7/16” / 11mm), and the line's working elongation should not exceed 7% at 540 lb load.
3/8” HTP DOES NOT meet ANSI Z133-2012 standards.
The full ANSI Z133 safety requirements are available on our tree care standards page.